Cart $0.00
Subtotal: $0.00

No products in the cart.

No products in the cart.

New Coat High Temp Paint 4L


Our Australian Made & Owned Firewise New Coat High Temp Paint is suitable for painting items that are exposed to high temperatures.

  • Prevents Rust
  • Heat Resistant to 500oC
  • Satin Finish

Product does not qualify for free shipping

Items that get hot require special heat-resistant paint to help prevent them from rusting. New Coat High Temp Paint is a self-priming, silicone-based, low-sheen, heat-resistant paint that withstands continuous temperatures up to 350°C (up to 500°C for short periods). It may be painted directly onto cast iron, steel and stainless steel.

Ideal for:

  • Pot-Belly Stoves
  • Heaters
  • Ovens
  • Flues
  • BBQs
  • Exhaust Manifolds

Colour: Black Satin

Coverage: One (1) 350mL can cover approximately 1 to 1.2m2.

Note: 4L is made to order, minimum three (3) business days turn around time.



How to Use

PREPARATION: Clean surface thoroughly. Remove all traces of grease, oil, dirt and rust. Sand previously painted surfaces lightly. Wipe with mineral turps and allow to dry.

APPLICATION: Choose a dry, well ventilated area. Stir thoroughly. Apply in thin coats. Two coats are usually sufficient. Lightly sand between coats. Do not paint below 5°C or in high humidity.

DRY TIME: Touch dry in 1-2 hours. Handle in 4-6 hours. Recoat after 16 hours. Longer drying time needed in cold or damp/humid weather. Allow 24hrs between drying and curing.

CURING: It is important that the heating unit be fully cured to achieve ‘a hard, dry state’, as below:

  • Ensure good ventilation by opening all windows and doors.
  • Light a small fire inside the unit using paper and kindling wood only and maintain the fire’s intensity for at least 1 hour. Some fumes and smoke may be emitted during this time. Avoid breathing fumes and smoke.
  • Gradually build the fire’s intensity over a further 1 hour period in order to complete the post curing of the paint. Very little fumes or smoke should be emitted during this time.
  • When this process has been completed, the unit may be used in the normal manner.

CLEAN UP: Clean brushes and equipment with mineral turps after use.

COVERAGE: 13-18m2/L

Note: Paint may be thinned with up to 10% mineral turpentine for brushing or up to 25% for spraying.


PROTECT OUR ENVIRONMENT: Do not pour leftover paint down the drain.

Safety & First Aid

SAFETY DIRECTIONS: FLAMMABLE. Keep all paint products out of reach of children. May be harmful if swallowed. May cause an allergic skin reaction. May cause drowsiness or dizziness. May cause respiratory irritation. DO NOT SWALLOW. NOT TO BE USED AS A FOOD CONTAINER.

FIRST AID: For advice, contact a Poisons Information Centre (e.g. phone Australia 13 11 26; New Zealand 0800 764 766) or a doctor (at once). If swallowed, do NOT induce vomiting. If in eyes, hold eyelids apart and flush the eye continuously with running water. Continue flushing until advised to stop by a Poisons Information Centre or a doctor, or for at least 15 minutes. If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water.


If I want to remove the paint how do I get it off?
A heat gun or sandblaster will do the trick.

Can it be used to paint a motorbike exhaust?
Yes it can, so long as you can cure the paint with heat (that isn’t a fire) it will work.

Is a primer required before using New Coat High Temp Paint?
No, no primer is required.

Is it ok to paint over a potbelly stove polish, that has been previously had stove polish applied to it?
No, you are best to stick with stove polish however, if you do want to use paint, you will need to sand back the stove and ensure all traces of stove polish are removed.

If I paint my range hood, will the New Coat High Temp Paint still cure?
Yes, the heat coming from the stovetop will be enough to cure it.

What is the VOC Content in grams per litre of your New Coat High Temp Paint?
The VOC is approximately 440-grams/ litre.
*Please note that the VOC is calculated according to the definition of what constitutes a VOC under Australian considerations and what is used by APAS (Australian Paints Approval Scheme), which is the defining body in Australia.

Is the paint, water or solvent based?
Our High Temp Paint is solvent based.

Can I use this to paint the inside of my brick fireplace?
We have not tested this product on brick so we are unable to advise if it will work, but theoretically we see no problem. Bricks are quite porous, but our paint does contain a primer. Please make sure to still follow all of the instructions.

SDS & Documents

Click on the links below to view and/or download.

Where to Buy

Major Stores:

Australia Wide
Woolworths Everyday Market Place (online)             Find Firewise New Coat High Temp Paint

Can’t find a product locally? Call or email one of our distributors to see if they supply a store near you or buy direct online from us.
(Note: Some distributors do not stock our whole range)


Australia Wide
S&D Berg

Phone: 03 9890 1634
Email: sales@sdberg.com.au

Phone: 07 3272 9051
Email: ramdexint@tpg.com.au


Customer Reviews
You may also like
Scroll to Top

Subscribe Now and Save 25% off your first order over $50