fbpx

FREE SHIPPING ON ORDERS OVER $75 AUSTRALIA WIDE

Cart $0.00
0
0
Subtotal: $0.00

No products in the cart.

No products in the cart.

Hot Spot Ready to Use Mortar 500g

$17.47

Our Australian Made & Owned Firewise Ready to Use Mortar is a general purpose mortar, for installing or repairing fireplace bricks.

  • Ensures Smoke & Gas Tight Joints
  • Heat Resistant to 1400°C
  • Excellent Adhesion
  • Dry in 24 Hours

Availability: 498 in stock

Over time bricks surrounding fireplaces and BBQs can come loose or crack. It is important to use mortar and bricks that are heat resistant. Use Firewise Hot Spot Ready to Use Mortar to repair or install fireplace bricks. Suitable for use outdoors, repairs must be kept dry for the first 24 hrs.

Colour: Sandstone.

Ideal for:

  • Installing brick fireplaces or BBQs
  • Repairing brick fireplaces or BBQs
  • Repairing cracked bricks
  • Ensuring smoke and gas-tight joints
  • Heat Resistant to 1400°C
  • Excellent Adhesion
  • Dry in 24 Hours

Can be used for outdoor items, must be kept dry for 24 hrs while the mortar is curing.

Handy Hint: Use Firewise Instant Brick Castable Cement for larger repairs.

Brand

Firewise

How to Use

Clean the area to be filled/fixed, removing any loose material and dust.

  • Open Hot Spot Ready to Use Mortar on a flat surface.
  • Mix thoroughly until even consistency is reached.
  • Wet the area to be repaired with water, then apply with a trowel or suitable tool.
  • Allow 24 hours to dry.
  • Keep lid tightly closed and store away from heat when not in use.

Handy Hint: Use Firewise Instant Brick Castable Cement for larger repairs.

Safety & First Aid

SAFETY DIRECTIONS: Keep out of reach of children. Avoid contact with skin and eyes. Wear suitable gloves and eye/face protection.

FIRST AID: For advice, contact a Poisons Information Centre (e.g. phone Australia 13 11 26; New Zealand 0800 764 766) or a doctor (at once). If swallowed, do NOT induce vomiting. If in eyes, hold eyelids apart and flush the eye continuously with running water. Continue flushing until advised to stop by a Poisons Information Centre or a doctor, or for at least 15 minutes. If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water.

FAQ's

What temperature is the product effective to?
1400°C

How long after applying product can I use my heater?
Hot Spot Ready to Use Mortar requires 24hours to air dry. You can use the heater after that.

Is Hot Spot Ready to Use Mortar ok for use on an outside BBQ?
Yes, Hot Spot Ready to Use Mortar can be used if it is cured and dried. Protect from rain/moisture for 24 hrs until curing process is complete. It is not as strong as instant brick.

What is the difference between Hot Spot Ready to Use Mortar and Black Patch Stove Putty?
The colour – Hot Spot Ready to Use Mortar is a sandy colour, while Black Patch Stove Putty is black.

Is Hot Spot Ready to Use Mortar suitable to repair a smashed up fire box in a Kamado Cooker?
Yes in principle it should hold all the pieces together, but we have never tested our product in this situation.

Is Hot Spot Ready To Use Mortar suitable for outdoors?
Yes, providing that it is fully air-dried for at least 24 hours prior to getting wet.

Can this be used to render my pizza oven?
It can be used as ‘render’ per say – this cannot be applied too thick as it can crack. We really recommend our Instant Brick Castable Cement for this kind of project as the formula is more suited to be applied in thicker layers. Instant Brick is to be used inside only.

The liquid on top of the Hot Spot Ready to Use Mortar has leaked on my porcelain tiles and has left a mark, how do I get it off?
This liquid sets once its exposed to air/ heat – so there is no physical way of removing the product. What can be used to lighten the effect is Jif cream as it has a cutting agent in its formula (a test on an inconspicuous area is recommended prior) or a magic eraser.

Can I use this product to seal a crack in my domestic oven?
Hot Spot Ready Mortar is perfect for this kind of project however, we recommend to etch the surface.
As domestic ovens are a smooth surface the Black Patch Stove Putty will need a rough surface to adhere to – some sand paper will do the trick.

SDS & Documents

Click on the links below to view and/or download.

Customer Reviews

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Craig Stevens
Hot Spot

easy to use and great finish

M
Michael J
Great product

Really impressed with the results. Set as hard as a rock and saved having to replace the fire bricks. Highly recommend it.

You may also like
Scroll to Top

Subscribe Now and Save 25% off your first order over $50