How to Use
- Use in a well-ventilated area with open windows and an exhaust fan on if possible.
- Fill the bath with cold or hot water (preferably hot) to cover the jets.
- Measure and empty 50mL of Magic Spa Bath Cleaner into the bath water.
- Run jets for 5-10 minutes. Very dirty pipes will require longer. Foaming will occur.
- Turn jets off and drain bath. Rinse bath with cold water.
Note: Magic Spa Bath Cleaner will not tarnish gold or chrome plated jets.
Handy Hint: Clean with Magic Spa Bath Cleaner after every use. Use Magic Stainless Steel Cleaner & Protector on your stainless-steel taps to add shine and a protective layer.
Safety & First Aid
SAFETY DIRECTIONS: Keep out of reach of children. Avoid contact with skin and eyes. Wear protective gloves and eye protection. DO NOT SWALLOW. NOT TO BE USED AS A FOOD CONTAINER.
FIRST AID: For advice, contact a Poisons Information Centre (e.g. phone Australia 13 12 26; New Zealand 0800 764 766) or a doctor (at once). If in eyes, hold eyelids apart and flush the eye continuously with running water. Continue flushing until advised to stop by a Poisons Information Centre or a doctor, or for at least 15 minutes. If swallowed, do NOT induce vomiting.
FAQ's
Do I need to rinse the pipes out after I have cleaned the spa bath with Spa Bath Magic?
No, there is no need to rinse the pipes after you have cleaned the spa bath, the residue will continue to work and keep killing bacteria.
Can I use Spa Bath Cleaner in my outdoor spa?
We do not recommend Spa Bath Cleaner for outdoor Spas. This has been formulated for the use of spa baths which are drained after each use and there are no chemicals e.g. Chlorine to keep it clean constantly. Chlorine itself will keep your outdoor spa clean, please see a pool specialist as there will be other suitable products for you.
I have used Spa Bath Cleaner but my pipes/ tub are still dirty?
Firstly, dont worry the Spa Bath Cleaner has done its job! Secondly, the build-up in the pipes was too excessive for the Spa Bath Cleaner to do its job throughly with just one go. This build-up is being broken down and it’s you are seeing being expelled into the tub. Please persist, this can take more than 1 go.
If you are trying with no avail, you can try the following:
- Leave the solution in for longer. Turn off jets, let it soak then run again
- Use warm to hot water. It is important to open windows, turn on extraction fans and keep away from the bathroom until done
Both of these options can be combined.
Is this Septic & Greywater safe?
Due to the nature of this product being a quat-based cleaner, we are unable to provide guidance on its compatibility with septic and greywater systems. Therefore, we cannot recommend its use in such systems.
SDS & Documents
Click on the links below to view and download.